Do you know ACC STERLING mark ? Like Reed & Barton Franc

PHOTOS REQUIRED - marks + item
anaf
Posts: 1
Joined: Wed Jun 28, 2006 2:54 am

Do you know ACC STERLING mark ? Like Reed & Barton Franc

Postby anaf » Thu Jun 29, 2006 4:13 am

I own a complete flatware set hallmarked ACC STERLING 925 (with a crown + a spoon + a fork inside). The pattern is the very same as Francis I by Reed & Barton, but the hallmark is not registred in 925-1000.com . The weight of a fork is very heavy (over 100gram / 3.2oz. each). The stainless steel blades of the knives bear the same crown mark + inox and FixPat.
I would be gratefull to anyone able to give me an information about the manufacturer and the age of this flatware.

Many Thank's
Ana

Image

admin
Site Admin
Posts: 2492
Joined: Fri Apr 01, 2005 6:52 pm

Postby admin » Sun Jul 30, 2006 12:40 am

Hi Ana,
Although the marks are rendered in the American fashion, I suspect these may have been made elsewhere. Will keep it in this category and see if anyone knows it.
Regards, Tom

Hose_dk
contributor
Posts: 1487
Joined: Sun May 28, 2006 1:39 pm
Location: Denmark

Postby Hose_dk » Sun Jul 30, 2006 10:48 am

Inox is a danish steel producer.
The rest of the hallmarks however are not Danish.

admin
Site Admin
Posts: 2492
Joined: Fri Apr 01, 2005 6:52 pm

Postby admin » Sun Jul 30, 2006 3:40 pm

Hosedk,
I thought "inox" was just the generic European term for stainless steel and not specific to any particular company.

Regards, Tom

Bahner
contributor
Posts: 1231
Joined: Tue Oct 18, 2005 11:34 am
Location: Berlin, Germany

Postby Bahner » Mon Jul 31, 2006 5:46 am

Hello, 'inox' is used in several European countries (France, Belgium, Sweden and others) and is not a makers mark. Best wishes, Bahner

Matulda
contributor
Posts: 64
Joined: Tue Oct 11, 2005 2:01 pm
Location: Sweden

Postby Matulda » Mon Jul 31, 2006 7:08 am

To be precise, inox is a French term for stainless steel, short for inoxydable.

Hose_dk
contributor
Posts: 1487
Joined: Sun May 28, 2006 1:39 pm
Location: Denmark

Postby Hose_dk » Mon Jul 31, 2006 2:20 pm

OK thank you - i did not know that. I just found a steel producer with that name so I thought that he was the supplyer.
So I also learned something today.

emaliek
Posts: 35
Joined: Tue Mar 27, 2007 1:55 pm
Location: Midwest

Re: Do you know ACC STERLING mark ? Like Reed & Barton Franc

Postby emaliek » Tue Apr 25, 2017 11:51 am

I have a serving spoon of the same design and hallmarks in addition 1 AL Italian hallmark for Cesa. I believe the pattern name is Quirinale.


Return to “Other Countries”

Who is online

Users browsing this forum: No registered users and 3 guests