Need professional help. Big silver vase or plate
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Need professional help. Big silver vase or plate
Hello, friends. Need help to identify this piece of art silversmith. This big silver vase have only mark KH 800
And 2 words on 1 leg Spazza and on another side Gaio, I've check it is Italian words. The weight in 949 gramm. I have red a lot of information but didn't find such mark. Maybe someone know who is the master KH and what is the country of manufacture?
And 2 words on 1 leg Spazza and on another side Gaio, I've check it is Italian words. The weight in 949 gramm. I have red a lot of information but didn't find such mark. Maybe someone know who is the master KH and what is the country of manufacture?
Re: Need professional help. Big silver vase or plate
Might start with "Unsanctioned Common Marks" section here: https://www.925-1000.com/Fitalian_marks_01.html
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
I read this but can’t find similar pieces of silversmith. To understand where and when it was madeTraintime wrote:Might start with "Unsanctioned Common Marks" section here: https://www.925-1000.com/Fitalian_marks_01.html
Re: Need professional help. Big silver vase or plate
I hate to drop in a complication, but because only the legs are marked in Italian and things can be mated, we might need Bahner's expertise to rule out a truncated version of the c.1920's-1940's mark of Karl Hohmann: https://www.925-1000.com/Fgerman_marks_a1884_4.html
I don't know why a German maker might be using Italian legs or markings, but there was a thing called the Axis Powers for a short while. And some German 800 marks do appear in these rectangle sinks as well.
I don't know why a German maker might be using Italian legs or markings, but there was a thing called the Axis Powers for a short while. And some German 800 marks do appear in these rectangle sinks as well.
Re: Need professional help. Big silver vase or plate
Perhaps the translation of Gaio and Spazza reads as "gay sweep" like a pattern description? There would seem to be no other reason for these marks.
Re: Need professional help. Big silver vase or plate
Hi,
KH are likely initials of a German maker (those letters are unusual in the beginning of Italian names).
Gaio and Spazza are most likely Italian retailers.
Regards
KH are likely initials of a German maker (those letters are unusual in the beginning of Italian names).
Gaio and Spazza are most likely Italian retailers.
Regards
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
Thank you for your reply. I saw a few silver vases and plates with both marks Germany and Italy. I examine Karl H. objects but there are few of them in Internet. What is Bahner's expertise? Only 1 leg with 2 words: Spazza and Guai Maybe you r right the legs seems to be from another object because of the way they attached to plateTraintime wrote:I hate to drop in a complication, but because only the legs are marked in Italian and things can be mated, we might need Bahner's expertise to rule out a truncated version of the c.1920's-1940's mark of Karl Hohmann: https://www.925-1000.com/Fgerman_marks_a1884_4.html
I don't know why a German maker might be using Italian legs or markings, but there was a thing called the Axis Powers for a short while. And some German 800 marks do appear in these rectangle sinks as well.
Re: Need professional help. Big silver vase or plate
Legs transferred from another object ?
Examine the solder with the tip of a sharp needle.Soft tin lead solder will be scratched, hard solder is impossible to scratch.
Hard solder is the proof of genuine manufacture because heating of the entire object is needed and then immersion into pickling acid solution that would have destroyed gilding.
In short, I think legs with retailer name belong there unless fixed with soft solder.
Regards
Examine the solder with the tip of a sharp needle.Soft tin lead solder will be scratched, hard solder is impossible to scratch.
Hard solder is the proof of genuine manufacture because heating of the entire object is needed and then immersion into pickling acid solution that would have destroyed gilding.
In short, I think legs with retailer name belong there unless fixed with soft solder.
Regards
Re: Need professional help. Big silver vase or plate
I did not find any Italian manufacturer from 1935 to 1970 called Spazza or Guai or Guaio or Gaio.
The funny thing is that in Italian " spazza guai" means sweeps away troubles.
The funny thing is that in Italian " spazza guai" means sweeps away troubles.
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
Ok, l”ll examine solder. But what about mark KH I thought that the clue to country, date and manufacturer. I even can’t find similar vases to campareAG2012 wrote:Legs transferred from another object ?
Examine the solder with the tip of a sharp needle.Soft tin lead solder will be scratched, hard solder is impossible to scratch.
Hard solder is the proof of genuine manufacture because heating of the entire object is needed and then immersion into pickling acid solution that would have destroyed gilding.
In short, I think legs with retailer name belong there unless fixed with soft solder.
Regards
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
Maybe this mark is dedicated to special event like wedding?amena wrote:I did not find any Italian manufacturer from 1935 to 1970 called Spazza or Guai or Guaio or Gaio.
The funny thing is that in Italian " spazza guai" means sweeps away troubles.
Re: Need professional help. Big silver vase or plate
It's a beautiful piece, but now that we have the correct spelling you've got me laughing as we have arrived at the not-so-famous Italian firm of Sweep & Mess, a.k.a. The Odd Couple (Felix holding a crumber while Oscar clutches a beer can). Personally, I was not thinking of legs stolen from another object, but rather a cooperative arrangement to bring a final product to a specific market. However, if a German maker was willing to alter their mark in order to suit an accepted Italian format, I see no reason why they wouldn't also provide additional Italian words or marks to their own legs. It was the difference of inside details (beyond the marks) on the fourth leg from the other three that seemed like a lot of trouble for the silversmiths to go through unless they expected high sales at the buying end in Italy. But that would be a question of their tooling and costs. If the legs were already being made in Italy, then it might be as simple as mating them during the final work at whichever end this was all done. As to "why Bahner?", you would would have to ask him yourself how he seems to know so many details about German makers. It's not meant to say that the other fine minds on this site are any less knowledgeable, but they all have their own specialty areas of concern and study. I just say Thank God they all turn up here!
Re: Need professional help. Big silver vase or plate
Hello, the object is untypical for Hohmann so i do not think this is his product. Have no clue though, sorry. Regards, Bahner
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
Hello, thank you for your reply. Is this german mark?Bahner wrote:Hello, the object is untypical for Hohmann so i do not think this is his product. Have no clue though, sorry. Regards, Bahner
Re: Need professional help. Big silver vase or plate
Hello, the marks do not ring a bell so my guess is as good as yours. Regards, Bahner
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
Maybe you can advise where should i search?)Bahner wrote:Hello, the marks do not ring a bell so my guess is as good as yours. Regards, Bahner
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
I've checked the solder and it is hard and not soft. So legs has been added before gild. I've checked all hallmark and didn't find any KH 800 without any other marks near. So it is no-name silversmith from Italy)AG2012 wrote:Legs transferred from another object ?
Examine the solder with the tip of a sharp needle.Soft tin lead solder will be scratched, hard solder is impossible to scratch.
Hard solder is the proof of genuine manufacture because heating of the entire object is needed and then immersion into pickling acid solution that would have destroyed gilding.
In short, I think legs with retailer name belong there unless fixed with soft solder.
Regards
Re: Need professional help. Big silver vase or plate
It is very unlikely that an Italian silversmith has the initials K Y, and even the style does not seem Italian. If I had to guess, I would say German. but it's just a guess.
Regards
Amena
Regards
Amena
-
- Posts: 11
- Joined: Thu Aug 08, 2019 10:32 am
Re: Need professional help. Big silver vase or plate
I’ve found another bowl with same markamena wrote:It is very unlikely that an Italian silversmith has the initials K Y, and even the style does not seem Italian. If I had to guess, I would say German. but it's just a guess.
Regards
Amena
(admin edit - see Posting Requirements )