Help with a hallmark on an enamel spoon

PHOTOS REQUIRED - marks + item
Post Reply
Twofatslugs
Posts: 4
Joined: Sat Nov 19, 2022 4:52 pm

Help with a hallmark on an enamel spoon

Post by Twofatslugs »

Hi! Hope you’re all doing well. While clearing out my grandmothers house, I came across a spoon that I thought looked relatively Russian in design. Turns out, it does seem to be Russian, but I’m really struggling to make out the second hallmark. If anyone has any ideas, they would be greatly appreciated. Design wise, it appears very similar to Gustav Klingert, but I’m 99% sure the hallmark is not a match.

Images below :)
https://imgur.com/a/jHSfTHT

Thanks!
dognose
Site Admin
Posts: 54126
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Help with a hallmark on an enamel spoon

Post by dognose »

Hi,

Welcome to the Forum.

Please embed your images as very few members will click on such links.

https://postimages.org (choose 'Share', then copy the 'Hotlink for forums' code) is recommended. Do not use Photobucket or Dropbox.

Trev.
Twofatslugs
Posts: 4
Joined: Sat Nov 19, 2022 4:52 pm

Re: Help with a hallmark on an enamel spoon

Post by Twofatslugs »

Hi Trev,

Apologies! Hopefully these should work.

Image

Image

Image
Mart
contributor
Posts: 145
Joined: Fri Jun 25, 2021 12:32 pm
Location: Novosibirsk, Koltsovo

Re: Help with a hallmark on an enamel spoon

Post by Mart »

Hello!
Moscow, 1899-1908.
At that time, several silversmiths with the initials "НЗ" worked here. The workshop of Nikolai Zverev (Николай Зверев) made products with enamel.
Twofatslugs
Posts: 4
Joined: Sat Nov 19, 2022 4:52 pm

Re: Help with a hallmark on an enamel spoon

Post by Twofatslugs »

Mart wrote:Hello!
Moscow, 1899-1908.
At that time, several silversmiths with the initials "НЗ" worked here. The workshop of Nikolai Zverev (Николай Зверев) made products with enamel.
Thanks so much for the information, very interesting! I was wondering if you know more about these kinds of spoons. I’m unsure if this was originally gilt, but the gold colour has disappeared. I can see very faint bits of gold in the crevices hence the question.

Thanks again!
Qrt.S
contributor
Posts: 3618
Joined: Fri Feb 27, 2009 9:32 am
Location: Helsinki Finland

Re: Help with a hallmark on an enamel spoon

Post by Qrt.S »

Just for the records: It is good to know that according to the Russian law the same maker's mark could not be used by several masters at the same time in the same place. Separating factors must be used in the punch. However, there are similar marks (e.g. initials) used in the same town, but the separating factor is the working period.
Mart
contributor
Posts: 145
Joined: Fri Jun 25, 2021 12:32 pm
Location: Novosibirsk, Koltsovo

Re: Help with a hallmark on an enamel spoon

Post by Mart »

Twofatslugs, this type of spoons in catalogs is called "Russian style". They were dessert, tablespoons, teaspoons. If you see the remains of gilding, then it means it was there. The presence of gilding on spoons is not uncommon.
Juke*
contributor
Posts: 64
Joined: Sun Apr 19, 2020 4:55 am

Re: Help with a hallmark on an enamel spoon

Post by Juke* »

Yours is a tea leaves serving spoon.

In addition to Mart's list there were coffee spoons, mocha spoons, jam spoons, salt spoons etc. The Russians loved the different types of spoons.
Silverstone
contributor
Posts: 43
Joined: Fri Jan 14, 2022 8:41 am
Location: Germany

Re: Help with a hallmark on an enamel spoon

Post by Silverstone »

Two for Twofatslugs,

here are two more enamel objects by Nikolai Zeverev (Николай Зверев):
a)
Image
Image
b)
Image
Image

As an encore - sugartongs by Nikolai Zverev:
Image
Image

Regards
Silverstone
Twofatslugs
Posts: 4
Joined: Sat Nov 19, 2022 4:52 pm

Re: Help with a hallmark on an enamel spoon

Post by Twofatslugs »

Thanks so much everyone for all the information, it’s been incredibly interesting reading and learning about something that has just been kept in a drawer for tens of years. I’d like to see if I can clean up the black on the back of the spoon as the gilt appears to be coming through after some very light cleaning, but I’ll have to do a lot of research prior so I don’t damage the enamel.

Thanks again everyone, what a fantastic forum!
dognose
Site Admin
Posts: 54126
Joined: Thu Dec 29, 2005 12:53 pm
Location: England

Re: Help with a hallmark on an enamel spoon

Post by dognose »

Hi,

If you post a question regarding maintenance in this section of the forum:

Silver Care / Techniques

I'm sure you'll receive some sound advice.

Trev.
Post Reply

Return to “Russian Silver”