Silver spoons

MARK IMAGE REQUIRED
Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Silver spoons

Postby Rose » Sat Mar 25, 2006 8:38 pm

Im not sure where I should post this..but anyway, I drew the marks on paper as my camera won't get a close enough picture. I have a set of silver spoons with the following marks on them.
Image 2 - I think it's AI but it's very hard to tell. There's also a makers mark, but also difficult to read. There are 3 letters, I believe the first one is a D. I'm not sure what the third image is.
Can anyone tell me anything about these marks.
Thank you.

Image

Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Postby Rose » Sat Mar 25, 2006 9:38 pm

I think the makers mark is either DSA or BSA or possibly D&S.

georgiansilver
contributor
Posts: 415
Joined: Thu Jan 12, 2006 5:50 am
Location: Gainsborough, Lincs

Postby georgiansilver » Sun Mar 26, 2006 8:59 am

Could you please re-check the four marks (numbers and letters) in the lozenge as they don't seem to make sense as they are. The lozenge was used in the UK between 1843 and 1883 and shows exactly which day of which month of which year it was made and the 'parcel' number for that day. The A1 stands for A1 plate...the best silver plate. Once you establish exactly the four figures in the corners I can date them for you.
Best wishes, Mike

Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Postby Rose » Sun Mar 26, 2006 11:11 am

Hi Mike, thanks for the reply. I rechecked the mark, and they are exactly as I had drawn them. That paticular mark is quite clear when I look at it through a magnifying glass, it's just too small to photopgraph. So yes, those are the marks.
Rose -

Neruda
Posts: 195
Joined: Sat Oct 15, 2005 9:50 am

Postby Neruda » Tue Mar 28, 2006 4:28 pm

The British registered design lozenge is clearly explained here: http://www.great-glass.co.uk/glass%20notes/lozkey.htm The site specifically relates to glass, the only difference is metal objects were class I, the mark at the very top.

As you will see, there were two cycles. The distribution of letters versus numbers is reversed in the two series. Hence Georgiansilver's dilema - your letters/numbers aren't right!

Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Postby Rose » Wed Mar 29, 2006 9:30 am

Thanks for the input, Neruda, but yes, I have checked the letters and numbers again, and they are definately as I have stated. Top of the diamond "I"..First Number on top "4", right side "4". left side "1", bottom, "C". The mark is extremely clear so there is no mistake as to what the marks are.
Thank you.

dragonflywink
co-admin
Posts: 2428
Joined: Wed Jun 22, 2005 10:42 am
Location: Orlando, Florida
Contact:

Postby dragonflywink » Wed Mar 29, 2006 1:03 pm

Seems to me that perhaps the right-hand "4" might actually be a partially rubbed "A", which would correspond to the year 1871.

Cheryl ;o)

Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Postby Rose » Thu Mar 30, 2006 9:29 am

Hi Cheryl...Thank you for the input. The marks are definately clear so there is no mistaking what they are. It is absolutely a number 4. :)

georgiansilver
contributor
Posts: 415
Joined: Thu Jan 12, 2006 5:50 am
Location: Gainsborough, Lincs

Postby georgiansilver » Thu Mar 30, 2006 9:48 am

In that case the lozenge is problematic inasmuch as the number letter sequence is out of sync. Cannot help further with it...sorry. Best wishes, Mike.

Rose
Posts: 14
Joined: Wed Mar 01, 2006 12:29 am

Postby Rose » Thu Mar 30, 2006 10:19 am

Image

I was finally able to take a pic. Thank you Mike:)


Return to “Silver Plate Trademarks - Single Image”

Who is online

Users browsing this forum: No registered users and 5 guests