Unger Brooch
Unger Brooch
I'm trying to find some info on this brooch I bought. I cant find many examples of this model, only 1 which I'll post next.
Anyway, I was told b/c of the way the vent holes are it's likely a fake?
But since I'd never heard of that I went looking and found tons of other brooches from Unger on the market with vent holes like this....
So I'm unsure what to make of it.
Any thoughts?
Anyway, I was told b/c of the way the vent holes are it's likely a fake?
But since I'd never heard of that I went looking and found tons of other brooches from Unger on the market with vent holes like this....
So I'm unsure what to make of it.
Any thoughts?
Re: Unger Brooch
Now, I've only found 2 examples of brooches in this model online.
This is NOT MINE, but one that was previously sold from another online seller.
The back is identical, even the mark.
This is NOT MINE, but one that was previously sold from another online seller.
The back is identical, even the mark.
Re: Unger Brooch
forgive me... the history is interesting but I dont see anything related to my question?
Re: Unger Brooch
I see nothing wrong with vent holes.The brooch is made of two halves;the front is die stamped and soldered to the back, meaning the brooch is hollow.Anyway, I was told b/c of the way the vent holes are it's likely a fake?
Without vent holes it would explode when hard soldered under high temperature and acid pickling afterwards.
How can you expect to find many Art Nouveau examples of the same brooch ? Even two identical pieces is a success.
Btw.steel dies for stamping silver sheets are very expensive and profitable to fake only if hundreds or thousands examples are made on industrial scale.
In short, I think your brooch is genuine.
Regards
Re: Unger Brooch
Any replies are for the benefit of anyone interested enough to read them, not just the OP.bonsai wrote:forgive me... the history is interesting but I dont see anything related to my question?
Trev.
Re: Unger Brooch
Excellent thanks. I didnt know that re the steel. so basically if it's a fake we'd expect to see many replicas?AG2012 wrote:I see nothing wrong with vent holes.The brooch is made of two halves;the front is die stamped and soldered to the back, meaning the brooch is hollow.Anyway, I was told b/c of the way the vent holes are it's likely a fake?
Without vent holes it would explode when hard soldered under high temperature and acid pickling afterwards.
How can you expect to find many Art Nouveau examples of the same brooch ? Even two identical pieces is a success.
Btw.steel dies for stamping silver sheets are very expensive and profitable to fake only if hundreds or thousands examples are made on industrial scale.
In short, I think your brooch is genuine.
Regards
Re the vent holes I am seeking more info b/c I was told they should be "drilled" and these appear to be "punched with a nail" and that might indicate a fake.
I've looked high and low and find a # that look to be similar to mine. So I'm wondering if it's just natural variability in the pieces. I've also found stamps exactly like mine (the E in sterling is worn off at the bottom).
Re: Unger Brooch
I've seen a # of "lovers dream" items that look like cheap replicas to me. Some not marked, others with the wrong bail for a locket. That would explain the large #s of that pattern (the steel dye and needing large # to produce fakes)
Re: Unger Brooch
Fakes,in general:
On close inspection the joint between the two pieces (back and front) is visible in some sections around the edge.
There are other flaws that do not appear to be the result of normal wear.
Lack of detail.
On close inspection the joint between the two pieces (back and front) is visible in some sections around the edge.
There are other flaws that do not appear to be the result of normal wear.
Lack of detail.
Re: Unger Brooch
I was told to watch for solder balls and all that
Re the lack of detail, for ex look at my brooch on the top left. There are no details of the silver beads. I believe they were, however worn away from holding as this i is where it'd be held. I inspected it closely and i'm unsure how (if it is a fake) they'd have detail on all the areas and miss that like that.
Re the soldering of the 2 pieces I believe mine is well enough, but would that wear away with time too to become visible in some areas? i began inspecting other unger brooches on sites and can see some solder lines in places... but I believe the pieces are legit.....just perhaps worn from wear.
Should these 2 types of "wear" be expected with age or are they more indicative of fakes?
Re the lack of detail, for ex look at my brooch on the top left. There are no details of the silver beads. I believe they were, however worn away from holding as this i is where it'd be held. I inspected it closely and i'm unsure how (if it is a fake) they'd have detail on all the areas and miss that like that.
Re the soldering of the 2 pieces I believe mine is well enough, but would that wear away with time too to become visible in some areas? i began inspecting other unger brooches on sites and can see some solder lines in places... but I believe the pieces are legit.....just perhaps worn from wear.
Should these 2 types of "wear" be expected with age or are they more indicative of fakes?
Re: Unger Brooch
Attempts to fake wear are not very successful because passage of time (hundred years) leaves micro traces in all directions which cannot be faked.
Soldered edges are sometimes visible even on high quality jewelry, but very discrete if due to wear after 100 years.
It takes time and experience with many examples in hands and inspecting them with 10 x jewelers loupe.
Regards
Soldered edges are sometimes visible even on high quality jewelry, but very discrete if due to wear after 100 years.
It takes time and experience with many examples in hands and inspecting them with 10 x jewelers loupe.
Regards
-
- contributor
- Posts: 550
- Joined: Wed Feb 10, 2010 3:22 pm
Re: Unger Brooch
Almost every fake Unger bros piece I have seen is made via Electroforming, it's fast and cheap and usually pretty obvious.
Re: Unger Brooch
thank you both for the replies. I was reading about electro forming. My brooch does not appear to be made in that way correct? I'm looking at acquiring a locket now so trying to learn as much as possible. I've seen some that are quite clearly fakes.legrandmogol wrote:Almost every fake Unger bros piece I have seen is made via Electroforming, it's fast and cheap and usually pretty obvious.
-
- contributor
- Posts: 550
- Joined: Wed Feb 10, 2010 3:22 pm
Re: Unger Brooch
Yes, your piece was not made with electroforming. The details on your piece are sharp and beautiful and it is definitely authentic
Re: Unger Brooch
Thanks. As I've been trying to learn more and more and studying types of silver fakes. Am I correct that this is a piece that is most likely fake?