I picked up an old spoon, it has a makers mark of HS with a round symbol to the left of the maker's mark.
The spoon also has an inscription - Mariam Rimember From Your Grandfather Henry Leligman 1776.
Note: not a typo on the word "Rimember".
The bowl shows quite a bit of tip wear on the left side (from use), It was well used. It is a serving spoon size 8 and quarter or so inches long.
Any help with the maker would be appreciated. I have done a lot of research but have not come up with the maker.
I have not figured out how to upload images yet but I will when I learn.
Thank you,
Dave
Need Help With Maker of Spoon
Re: Need Help With Maker of Spoon
Looking at it again, it might be SH with the round symbol to the right. My wife just pointed that out to me.
Dave
Dave
Re: Need Help With Maker of Spoon
Hi Dave,
Welcome to the Forum.
Your question cannot be answered without the required images. The below should help you:
How to Add Images
Posting Requirements
Embedded images get a far greater response than just posting links.
Remember to use the 'Preview' button before submitting your post
For more information see:
http://www.925-1000.com/forum/viewtopic ... 82#p103282
Trev.
Welcome to the Forum.
Your question cannot be answered without the required images. The below should help you:
How to Add Images
Posting Requirements
Embedded images get a far greater response than just posting links.
Remember to use the 'Preview' button before submitting your post
For more information see:
http://www.925-1000.com/forum/viewtopic ... 82#p103282
Trev.
Re: Need Help With Maker of Spoon
Thank you, for that information. Also, can you tell me how I go about editing my post once I have my images to post ?dognose wrote:Hi Dave,
Welcome to the Forum.
Your question cannot be answered without the required images. The below should help you:
How to Add Images
Posting Requirements
Embedded images get a far greater response than just posting links.
Remember to use the 'Preview' button before submitting your post
For more information see:
http://www.925-1000.com/forum/viewtopic ... 82#p103282
Trev.
Dave
-
- co-admin
- Posts: 1724
- Joined: Tue Apr 09, 2013 9:22 am
- Location: Hertfordshire, UK
- Contact:
Re: Need Help With Maker of Spoon
There is no facility for editing your own posts; just keep adding Replies. However, if you use the "Preview" button as Trev suggests you will be able to see whether you have got it right before you Submit.
Phil
Phil
Re: Need Help With Maker of Spoon
Thank you Phil.silvermakersmarks wrote:There is no facility for editing your own posts; just keep adding Replies. However, if you use the "Preview" button as Trev suggests you will be able to see whether you have got it right before you Submit.
Phil
Re: Need Help With Maker of Spoon
I reported it with images, Admin you can delete this thread if you would like to.
Dave
Dave